★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 642-902 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/642-902-dumps.html


Exam Code: 642-902 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: implementing cisco ip routing
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 642-902 Exam.

2021 Oct ccnp route 642-902 dumps:

Q191. Refer to the exhibit.

Which three statements are true? (Choose three.)

A. On the routing table of R4, the 10.1.1.0/24 route appears as an O E2 route.

B. On R4, the 172.16.1.0/24 route has a metric of 20.

C. The R3 S0/0 interface should not need the no ip split-horizon eigrp 1 configuration command for the 172.16.1.0/24 route to appear in the routing table of R2 as an D EX route.

D. The administrative distance of the 172.16.1.0/24 route in the routing table of R3 is 170.

E. On R5, the 4.0.0.0/8 route will have an administrative distance of 120 and a hop count of 6.

Answer: ABD


Q192. To configure 6to4 on a dual-stack edge router. Which three of the following are valid in 6to4 Tunneling configuration? (Choose three)

A. IPv4 Tunnel IP address

B. Tunnel mode (6to4)

C. Tunnel Keepalives

D. IPv4 Tunnel Destination

E. IPv4 Tunnel Source.

F. 6to4 IPv6 address (within 2002 /16)

Answer: BEF


Q193. Refer to the exhibit.

The customer has reported an issue about eBGP loading. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute would you configure to cause AS 100 outbound traffic to load the eBGP links more evenly?

A. On router A, set the default local-preference to 50.

B. On router B, set the default metric to 150.

C. On router B, configure a route map for 10.10.25.0/24 that sets the local preference to 150.

D. On router B, set the default local-preference to 150.

Answer: C


Q194. Which IPv6 address correctly compresses the IPv6 unicast address 2001:0:0:0:0DB8:0:0:417A? Select the best response.

A. 2001:0DB8:417A

B. 2001::0DB8::417A

C. 2001:::0DB8::417A

D. 2001:0DB8:0:0:417A

E. 2001::DB8:0:0:417A

F. 2001:::0DB8:0:0:417A

Answer: E


Q195. Refer to the exhibit.

A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2.As the router configuration specialist, what two things would you do to accomplish this goal? (Choose two.)

A. Enter the configuration on router B1.

B. Enter the configuration on router B4.

C. On the same router, enter the Summary-address 10.10.1.0 255.255.255.128 subcommand.

D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.

E. On the same router, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.

Answer: AD


Renovate certprepare 642-902:

Q196. Which attribute must exist in the BGP update packet? Select the best response.

A. LOCAL_ PREF

B. AGGREGATOR

C. AS_Path

D. Weight

Answer: C


Q197. Refer to the exhibit.

You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes.

Before you begin the actual implementation, which three pieces of information are more important to know than the others? (Choose three.)

A. the Committed Information Rate of all the Frame Relay PVCs

B. the Cisco IOS version running on all the routers

C. the router model number of all the spoke routers

D. the number of HQ networks connected behind the headquarter routers

E. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers

Answer: ABE


Q198. What does the default value of the EIGRP variance command of 1 mean?

A. Load balancing is disabled on this router.

B. The router performs equal-cost load balancing.

C. Only the path that is the feasible successor should be used.

D. The router only performs equal-cost load balancing on all paths that have a metric greater than 1.

Answer: B


Q199. Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two-way state. From the show ip ospf interface command output, what is the cause of this issue?

Select the best response.

A. All OSPF implementations must have at least one interface in area 0.

B. You are attempting to run in the broadcast mode over an NBMA interface.

C. Both routers are configured to function as a BDR; therefore, there is no DR router.

D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.

E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.

Answer: E


Q200. Refer to the exhibit.

Based upon the configuration, you need to understand why the policy routing match counts are not increasing. Which would be the first logical step to take? Select the best response.

A. Confirm if there are other problematic route-map statements that precede divert.

B. Check the access list for log hits.

C. Check the routing table for 212.50.185.126.

D. Remove any two of the set clauses. (Multiple set clause entries will cause PBR to use the routing table.)

Answer: B