★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 642-902 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/642-902-dumps.html


Pass4sure ensure that you get all of the solutions you expected to increase the good results of the 642-902 quiz, Cisco Certification 642-902 process quiz answers and questions, intended to connect the item by the specialists. Pass4sure 642-902 enough research resources on your area of interest may be the real analyze of the many other qualification Cisco 642-902 quiz. Used 642-902 quiz answers and questions, you will end up set up just the appropriate answer written using the judgement that individuals the answers. 642-902 quiz all of the the answers plus details happen to be validated through skilled professionals. Hence, the standard plus legitimateness on the quiz 642-902 are quite noise.

2021 Oct ccnp 642-902 dumps:

Q211. What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp command output? (Choose two.)

A. The network was originated via redistribution of an interior gateway protocol into BGP.

B. The network was defined by a static route.

C. The network was learned via IBGP.

D. The network was learned via EBGP.

E. The network was originated via a network or aggregate command.

Answer: AE


Q212. BGP contains two paths to a destination. Assuming both routes were originated locally and have an equal weight. What will be the next determining factor in choosing the best path?

A. lowest MED

B. highest local preference

C. lowest neighbor IP address

D. lowest origin code

E. shortest AS-path

Answer: B


Q213. Which routing protocol will continue to receive and process routing updates from neighbors after the passive inter face router configuration command is entered?

A. EIGRP

B. RIP

C. OSPF

D. IS-IS

Answer: B


Q214. Which two statements are true about EIGRP manual summarization? (Choose two.)

A. Manual summarization is configured on a per interface basis.

B. Manual summaries can be configured with the classful mask only.

C. When manual summarization is configured, autosummarization is automatically disabled by default.

D. The summary address is assigned an administrative distance of 10 by default.

E. The summary address is entered into the routing table and is shown to be sourced from the Null0 interface.

Answer: AE


Q215. What administrative distance is given to EIGRP summary routes?

A. 0

B. 1

C. 5

D. 90

E. 95

F. 170

Answer: C


Abreast of the times ccnp 642-902 exam fee:

Q216. CORRECT TEXT (Policy Based Routing Sim)

Company Acan has two links which can take it to the Internet. The company policy demands that you use web traffic to be forwarded only to Frame Relay link and other traffic can go through any links that are available. Use BGP attributes to solve the requested action.

Answer: 

1) Create an Access list that catches the HTTP traffic:

BorderRouter#access-list 101 permit tcp any any eq www Note that the server was not directly connected to the Border Router. There were a lot of EIGRP routes on it. In the real exam you do not know the exact IP address of the server in the EIGRP network so we have to use the source as "any" to catch all the source addresses.

2) Route map that sets the next hop address to be ISP1 and permits the rest of the traffic:

BorderRouter(config)#route-map pbr permit 10

BorderRouter(config-route-map)#match ip address 101

BorderRouter(config-route-map)#set ip next-hop 10.1.101.1 BorderRouter(config-route-map)#exit

BorderRouter(config)#route-map pbr permit 20

(Notice: the route-map pbr permit 20 line allows other traffic than HTTP to be routed. Otherwise, other traffic will be dropped)

3) Apply the route-map on the interface to the server in the EIGRP Network:

BorderRouter(config-route-map)#exit

BorderRouter(config)#int fa0/0

BorderRouter(config-if)#ip policy route-map pbr

BorderRouter(config-if)#exit

BorderRouter(config)#exit

4) There is a "Host for Testing", click on this host to open a box in which there is a button named "Generate HTTP traffic". Click on this button to generate some packets for HTTP traffic. Jump back to the BorderRouter and type the command "show route-map".

BorderRouter#show route-map

In the output you will see the line "Policy routing matches: 9 packets...". It means that the route- map we configured is working properly.


Q217. Refer to the exhibit.

All EIGRP load balancing parameters are set to their defaults. You want to use all the routes in the EIGRP topology for IP load balancing Which two EIGRP subcommands would you use to accomplish this goal? (Choose two.)

A. traffic-share balanced

B. distance

C. maximum-paths

D. default-network

E. variance

Answer: CE


Q218. Refer to the exhibit. Autonomous systems 200 and 300 have EBGP sessions established with their directly connected routers in autonomous system 100. IGP has been configured on all routers in autonomous system 100 and they successfully exchange routing updates. Traffic originated in autonomous system 200 cannot reach the destination autonomous system 300. What configuration should be done on the routers in autonomous system 100 in order for the traffic coming from autonomous system 200 to be forwarded to autonomous system 300?

Select the best response.

A. IBGP session must be established between routers R1 and R3, and the synchronization must be turned on.

B. IBGP session must be established between routers R1 and R3, and the synchronization must be turned off.

C. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned on.

D. IBGP session must be established between routers R1 R2 and R2 R3, and the synchronization must be turned off.

E. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned on.

F. IBGP speakers within autonomous 100 must be fully meshed, and the synchronization must be turned off.

Answer: F


Q219. Which three restrictions apply to OSPF stub areas? (Choose three.)

A. The area cannot be a backbone area.

B. Inter area routes are suppressed.

C. The area has no more than 10 routers.

D. No virtual links are allowed.

E. No Autonomous System Boundary Routers are allowed.

F. Redistribution is not allowed unless the packet is changed to a type 7 packet.

Answer: ADE


Q220. What two features are benefits of using GRE tunnels with IPsec over using IPsec tunnel alone for building site-to-site VPNs? (Choose two.)

A. allows dynamic routing securely over the tunnel

B. IKE keepalives are unidirectional and sent every ten seconds

C. reduces IPsec headers overhead since tunnel mode is used

D. supports non-IP traffic over the tunnel

E. uses Virtual Tunnel Interface (VTI) to simplify the IPsec VPN configuration

Answer: AD