★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-410-dumps.html
When the The idea providers are looking foe people today, who definitely are experienced, passing a good Microsoft 70-410 exam like that could be a excellent good results for just about any The idea skilled. Immediately after passing during this specialist thorough exam, you can go for alternative Microsoft accreditations. Due to the acceptance of the organization during the The idea arena, many organizations prefer to use The idea pros who present an Microsoft. 70-410 exam is for anyone who is interested within generating a future within web 2 . as well as application sector in Microsoft products. To arrive at a professional as well as pro amount within Microsoft career qualifications, passing within 70-410 exam could be the former phase.
2021 Nov microsoft official academic course 70-410:
Q21. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You reconfigure DC2 as a member server in the domain.
You need to add DC2 as the first domain controller in a new domain in the forest.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install WindowsFeature
D. Install AddsDomain
E. Rename-AdObject
F. Set AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: C
Explanation:
Since a member server does not have Active Directory Domain Services installed, you must install this role before you can configure the new Domain Controller (which would require you to run Install-ADDSForest).
Topic 2, Volume B
Q22. - (Topic 2)
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?
A. A reservation
B. A filter
C. A scope option
D. An exclusion
Answer: B
Explanation:
A. For clients that require a constant IP address
B. Filter to exclude MAC address of Server3
C. Range of allowed IP’s to be assigned
D. Exclude range of IP’s MAC address based filtering ensure that only a known set of devices in the system are able to obtain an IPAddress from the DHCP Reservation and Exclusion, two incredibly different concepts. An exclusion is an address or range of addresses taken from a DHCP scope that the DHCP server is not allowed to hand out. For example, if you have set a DHCP server to exclude the address range 192.168.0.1-192.168.0.10 then the only way a computer on your network would get an address of 192.168.0.4 would be if you assigned it statically on that machine. This is because DHCP knows NOT to give this range of IP addresses out. A reservation is a specific IP addresses that is tied to a certain device through its MAC address. For example, if we have a workstation on the network that requires a certain IP address, but we don’t want to go through to trouble of assigning it statically, then we can create a reservation for it. So if the MAC address of the NIC on the computer is AA-BB-00FF-CC-AA and we want it to maintain the IP address of 192.168.0.100 then we would create a DHCP reservation under that particular scope saying that the IP address
192.168.0.100 is reserved only for the MAC address AA-BB-00-FF-CC-AA. Reference: http://technet.microsoft.com/en-us/magazine/ff521761.aspx
Q23. - (Topic 1)
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter.
Host1 contains two virtual machines named VM1 and VM2.
You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On VM1, configure a Fibre Channel adapter.
B. On Host1, configure a new virtual switch.
C. On VM1, add a network adapter.
D. On Host1, configure a new Virtual Fibre Channel SAN.
E. On Host1, modify the Hyper-V settings.
Answer: A,D
Explanation:
Step 1:
D. Building a Virtual SAN The process of setting up virtual Fibre Channel starts with building a virtual SAN. The easiest way to accomplish this is to open the Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual SAN Manager command from the shortcut menu. Step 2:
A. Once you have created a virtual SAN, the next step in the process is to link a virtual machine to the virtual SAN. To do so, right click on the virtual machine for which you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre Channel Adapter option from the list of available hardware. Etc. Note:
* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating systems with direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated with a virtual machine.
Q24. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All user accounts are in an organizational unit (OU) named Employees.
You create a Group Policy object (GPO) named GP1. You link GP1 to the Employees OU.
You need to ensure that GP1 does not apply to the members of a group named Managers.
What should you configure?
A. The Security settings of Employees
B. The WMI filter for GP1
C. The Block Inheritance option for Employees
D. The Security settings of GP1
Answer: D
Explanation:
A. Wrong Group
B. Windows Management Instrumentation (WMI) filters allow you to dynamically determine
the scope of Group Policy objects (GPOs) based on attributes of the target computer.
C. Blocking inheritance prevents Group Policy objects (GPOs) that are linked to higher
sites, domains, or organizational units from being automatically inherited by the child-level.
D. Set Managers to – Members of this security group are exempt from this Group Policy
object.
Security settings.
You use the Security Settings extension to set security options for computers and users
within the scope of a Group Policy object. You can define local computer, domain, and network security settings. Figure below shows an example of the security settings that allow everyone to be affected by this GPO except the members of the Management group, who were explicitly denied permission to the GPO by setting the Apply Group Policy ACE to Deny. Note that if a member of the Management group were also a member of a group that had an explicit Allow setting for the Apply Group Policy ACE, the Deny would take precedence and the GPO would not affect the user.
Q25. DRAG DROP - (Topic 3)
You have a print server named Server1Server1 runs Windows Server 2008 R2. You have a file server named Server2. Server2 runs Windows Server 2012 R2.
You need to migrate all of the printers on Server1 to Server2.
Which actions should you perform on the servers?
To answer, drag the appropriate action to the correct servers in the answer area. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Refresh mcsa windows server 2012:
Q26. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
The password policy for the domain is set to require a minimum password length of 10 characters.
A user named User1 and a user named User2 work for the sales department.
User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters.
You need to identify what forces the two users to have different password lengths.
Which tool should you use?
A. Credential Manager
B. Security Configuration Wizard (SCW)
C. Group Policy Management
D. Active Directory Administrative Center
Answer: D
Explanation:
In Windows Server 2008, you can use fine-grained password policies to specify multiple password policies and apply different password restrictions and account lockout policies to different sets of users within a single domain. For example, to increase the security of privileged accounts, you can apply stricter settings to the privileged accounts and then apply less strict settings to the accounts of other users. Or in some cases, you may want to apply a special password policy for accounts whose passwords are synchronized with other data sources.
This is found in the Active Directory Administrative Center. You can use Active Directory Administrative Center to perform the following Active Directory administrative tasks: Create new user accounts or manage existing user accounts Create new groups or manage existing groups Create new computer accounts or manage existing computer accounts Create new organizational units (OUs) and containers or manage existing OUs Connect to one or several domains or domain controllers in the same instance of Active Directory Administrative Center, and view or manage the directory information for those domains or domain controllers Filter Active Directory data by using query-building search
: http://technet.microsoft.com/en-us/library/cc770842(v=ws.10).aspx
Q27. HOTSPOT - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on Hyperv1.
Users report that the time on their client computer is incorrect.
You log on to DC1 and verify that the time services are configured correctly.
You need to prevent time conflicts between the time provided by DC1 and other potential
time sources.
What should you configure?
To answer, select the appropriate object in the answer area.
Answer:
Q28. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012 R2.All client computers run Windows 7. The computer accounts for all of the client computers are located in an organizational unit (OU) named OU1.
An administrator links a Group Policy object (GPO) to OU1. The GPO contains several application control policies.
You discover that the application control policies are not enforced on the client computers.
You need to modify the GPO to ensure that the application control policies are enforced on the client computers.
What should you configure in the GPO?
To answer, select the appropriate service in the answer area.
Answer:
Q29. HOTSPOT - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed.
On Server1, you have a virtual machine named VM1.
You plan to deploy an image to VM1 by using Windows Deployment Services (WDS).
You need to ensure that VM1 can connect to Server1 by using PXE.
Which settings should you configure on VM1? To answer, select the appropriate settings in
the answer area.
Answer:
Q30. - (Topic 2)
You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Enterprise. You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. a clean installation of Windows Server 2012
B. an offline servicing by using Dism
C. an online servicing by using Dism
D. an upgrade installation of Windows Server 2012
Answer: C
Explanation:
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22