★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/300-075-dumps.html


Q121. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Not enough bandwidth has been allocated. 

B. Device Pool. 

C. Location. 

D. The pipe is not functioning. 

Answer:

Explanation: 

Based on the exhibit, each call is limited to no more than 128kbps per call, but the total available bandwidth is set to 256 kbps. This will allow the first to calls to go through, but there will be no more available bandwidth for the third call. 


Q122. Which statement is correct about AAR? 

A. The end users see, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention. 

B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call. 

C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP. 

D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth. 

Answer:

Explanation: 

Incorrect Answer: B, C, D Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml 


Q123. What happens if location-based CAC is used and there is no bandwidth available when a remote caller is placed on hold? 

A. Cisco Unified Communications Manager sends TOH rather than MOH. 

B. Cisco Unified Communications Manager terminates the call. 

C. Cisco Unified Communications Manager plays default MOH. 

D. Cisco Unified Communications Manager attempts to reconnect the call immediately. 

Answer:


Q124. While configuring Call Survivability in Cisco Unified Communications Manager, what step is mandatory to reach remote sites while in SRST mode? 

A. Enable Cisco Remote Site Reachability. 

B. Configure CFUR. 

C. Enable the SRST checkbox in the MGCP gateway. 

D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager. 

E. Enable the Failover Service parameter. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html 


Q125. Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST failover? 

A. ccm-manager fallback-mgcp 

B. telephony-service 

C. dialplan-pattern 

D. isdn overlap-receiving 

E. voice-translation-rule 

Answer:


Q126. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41? 

A. Set QoS mode to DiffServ and tag value 32. 

B. Set QoS mode to IntServ and tag value to 34. 

C. Set QoS mode to DiffServ and tag value 34. 

D. Set QoS mode to IntServ and tag value to 32. 

E. Set QoS mode to ToS and tag value to 32. 

Answer:


Q127. Which statement about H.323 Gatekeeper Call Admission Control is true? 

A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control. 

B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments. 

C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments. 

D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager. 

Answer:

Explanation: 

Incorrect Answer: A, C, D in distributed call processing deployments on a simple hub-and-spoke topology, you can implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express (Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cac.html#wp1044743 


Q128. Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? 

A. location controller 

B. route pattern 

C. route string 

D. URI 

Answer:


Q129. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.) 

A. call-manager-fallback 

B. max-ephones 

C. keepalive 

D. limit-dn 

E. ip source-address 

Answer: A,B,E 


Q130. What is a prerequisite of AAR deployment? 

A. You must have a single distributed call processing deployment. 

B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. 

C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. 

D. Clustering must be implemented over the WAN. 

E. You must have a centralized call processing deployment. 

Answer: