★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 350-050 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/350-050-dumps.html
Cause all that matters here is passing the Cisco 350-050 exam. Cause all that you need is a high score of 350-050 CCIE Wireless Beta Written Exam exam. The only one thing you need to do is downloading Exambible 350-050 exam study guides now. We will not let you down with our money-back guarantee.
2021 Oct tuthill pump 050-0043 for motorvac mcs 350:
Q1. You are configuring a TACACS+ server and the security team asks you for details about this protocol. Which three statements about the TACACS+ protocol are true? (Choose three.)
A. It is TCP based.
B. It is UDP based.
C. It uses port 49 by default.
D. It uses port 59 by default.
E. The username is sent in cleartext.
F. The username is encrypted.
Answer: ACF
Q2. Refer to the exhibit.
The wireless clients at your company are all on the 192.168.1.0/24 network. Given the applied ACL in the exhibit, which two statements are true? (Choose two.)
A. DNS requests from the wireless clients will be blocked.
B. ICMP requests will be allowed to travel to the wireless clients.
C. ICMP replies will be allowed to travel from the wireless clients.
D. DNS requests from the wireless clients will be allowed.
Answer: AB
Q3. Which three statements about workgroup bridges in a unified environment are true? (Choose three)
A. Web authentication is not supported for use with workgroup bridges.
B. VLANs are supported for use with workgroup bridges.
C. Wired clients that connect to a workgroup bridge inherit the QoS and AAA override attributes of the bridge.
D. If a workgroup bridge associates to a web-authentication WLAN, then the bridge is added to the exclusion list and all the workgroup bridge wired clients are deleted.
E. The lightweight feature Cisco CKM is supported for use with a workgroup bridge.
F. If your AP has two radios, then you can configure both for workgroup bridge mode.
Answer: ACD
Q4. Which two statements are not correct about client MFP? (Choose two.)
A. Client MFP can replace infrastructure MFP if only CCXv5 clients are used.
B. Client MFP encrypts class 3 unicast management frames using the security mechanisms defined by 802.11i.
C. In order to use client MFP, the client must support CCXv5 and negotiate WPA2 with AES-CCMP or TKIP.
D. The only supported method to obtain the pre-user MFP encryption keys is EAP authentication.
E. The CCXv5 client and access points must discard broadcast class 3 management frames.
Answer: AD
Q5. When designing a WLAN network to support both voice and context-aware services, which set of design principles should you follow?
A. An AP must be placed at the perimeter and in each of the four corners of the floor. All APs must be enabled to ensure proper coverage on the floor to provide -67 dBm, 20 percent cell overlap, and 19 dB channel separation.
B. An AP must be placed at the perimeter and in each of the four corners of the floor. Some APs may be disabled to ensure proper coverage on the floor to provide -67 dBm, 20 percent cell overlap, and 19 dB channel separation.
C. An AP must be placed at the perimeter and in each of the four corners of the floor to ensure proper coverage on the floor to provide -67 dBm, 20 percent cell overlap, and 19 dB channel separation. Some APs may be in monitor mode.
D. If a conflict occurs between the AP placement for voice design and for context-aware location design, then the voice design should take precedence, to protect against delays and dropping of sensitive voice traffic.
E. In a design that includes both voice and context-aware services, voice design always requires more APs to be deployed to ensure -67 dBm coverage, 20 percent cell overlap, 19 dB channel separation, and proper capacity planning.
F. In a design that includes both voice and context-aware services, voice design should take precedence to avoid co-channel interference, which can negatively affect voice quality. Voice design also requires -67 dBm coverage, 20 percent cell overlap, and 19 dB channel separation, which is more difficult to achieve.
Answer: C
Most up-to-date 350-050 braindump:
Q6. Refer to the exhibit.
You are testing coverage-hole detection in your lab. You are using the default Cisco WLC coverage-hole detection configuration that is shown. You have 14 test clients, all associated to the same AP. You move three of the clients far away from the AP so that they have an RSSI of -85 dBm or lower for 1 minute. To your surprise, you see precoverage-hole alarms, but no coverage-hole alarm is triggered.
Which two scenarios explain this issue? (Choose two.)
A. The failed clients must be at an RSSI of -81 dBm or lower for at least 90 seconds.
B. The failed clients must be at an RSSI of -80 dBm or lower for at least 90 seconds.
C. The number of failed clients is less than 25 percent of the total number of clients that are associated to the AP.
D. This Cisco WLC is not an RF group leader and so cannot make a coverage-hole decision.
E. Coverage-hole alarms are generated based on the number and percentage of failed packets from the client, rather than on thresholds.
Answer: AC
Q7. A retail company is refreshing their WLANs in their stores. Costs, resiliency, and ease of management are all important design criteria. Which two statements are true when considering your proposed Cisco Unified Wireless solution? (Choose two.)
A. FlexConnect (H-REAP) should be considered to manage the WLAN from a centralized controller. In the event of WAN failure, clients already connected can continue to connect and operate as normal.
B. FlexConnect (H-REAP) should not be considered to manage the WLAN. In the event of WAN failure, clients already connected will be dropped and need to re-associate and re-authenticate to the network, using the in-store RADIUS and directory services.
C. The Cisco 2504 WLC should be considered to manage the store WLANs. The Cisco 2504 WLC will provide full services to the store and can be managed and configured from a centralized controller. In the event of WAN failure, clients already connected can continue to connect and operate as normal.
D. The Cisco 2504 WLC should be considered to manage the store WLANs. The Cisco 2504 WLC will provide full services to the store and can be managed and configured from a centralized management system (NCS or WCS). In the event of WAN failure, clients already connected can continue to connect and operate as normal.
E. The Cisco 7510 WLC should be considered to be deployed in each store to manage the store WLAN. In the event of WAN failure, clients already connected can continue to connect and operate as normal.
Answer: AD
Q8. When authenticating wireless clients through PEAPv0 with MS-CHAPv2, which statement is correct?
A. Authentication credentials are exchanged inside a TLS tunnel.
B. The client must trust the RADIUS server certificate.
C. The same certification authority must issue both the client and server certificates.
D. The CN attribute of the RADIUS server certificate must contain the FQDN or the IP address of the RADIUS server itself.
E. A self-signed RADIUS server certificate cannot be used.
Answer: A
Q9. You are troubleshooting a connectivity issue on a Cisco WLC, in which wireless clients occasionally lose their connection. Which two of these infrastructure application services can help you to troubleshoot this issue by using one service to synchronize time on the WLC, and a server that is configured with another service to receive the output of the client debugs from the WLC? (Choose two.)
A. FTP
B. TFTP
C. syslog
D. SNMP
E. DHCP
F. NTP
G. TRAPLOG
Answer: CF
Q10. When you configure channel bonding on your APs by using the 2.4-GHz radio, what is the maximum number of APs that you can place in a given location so that the AP channels do not overlap?
A. One
B. Two
C. Three
D. Three in most of the countries, but 4 (including channel 14) in Japan
Answer: A