★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 642-447 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/642-447-dumps.html
Act now and download your Cisco 642-447 test today! Do not waste time for the worthless Cisco 642-447 tutorials. Download Up to the immediate present Cisco Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0) exam with real questions and answers and begin to learn Cisco 642-447 with a classic professional.
2021 Dec cipt1 v8.0:
Q121. - (Topic 12)
Which discard digits instruction removes the access code from a number before passing the number onto an adjacent system?
A. PreDot
B. PreAt
C. NoDigits
D. Trailing-#
Answer: A
Q122. - (Topic 12)
Which option is used to associate devices with a Cisco Unified Communications Manager group?
A. device pools
B. locations
C. regions
D. licenses
Answer: A
Q123. DRAG DROP - (Topic 12)
Click and drag the type of toll fraud on the left to the appropriate solution on the right.
Drag and drop question. Drag the items to the proper locations.
Click and drag the type of toll fraud on the left to the appropriate solution on the right.
Answer:
Q124. - (Topic 12)
An H.323 gateway is configured successfully on a Cisco Unified Communications Manager and communication occurs.
Which option is displayed on Cisco Unified CM Administration under Device Gateway?
A. Status is shown as Registered, and an IP address is displayed.
B. Status is shown as Unknown, and an IP address is displayed.
C. Status is shown as Registered, and an IP address is shown as Unknown.
D. Status is shown as Unknown, and an IP address is shown as Unknown.
Answer: B
Q125. - (Topic 1)
If an IP phone loses connectivity with its primary server and registers with its backup server, what happens when connectivity to the primary server is restored?
A. The IP phone will try to re-establish a connection to the primary server every 90 seconds.
B. The IP phone will continuously try to re-establish a connection with the primary server; if successful, the IP phone will re-register with the primary.
C. Once the IP phone registers with the backup server, the administrator will need to reset the IP phone for it to re-register with the primary server.
D. Once connectivity is re-established with the primary server, the IP phone will wait until there have been three successful TCP keepalive exchanges before it will re-register with the primary server.
Answer: B
Abreast of the times cipt 1:
Q126. - (Topic 3)
If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?
A. the user must press the # key
B. the user must press the Dial softkey
C. the user must press the enbloc softkey
D. when the user finishes dialing, the digits will be sent automatically
Answer: B
Q127. - (Topic 12)
ABC Company has four locations total, all connected via an IP WAN. Each location has a Cisco Unified Communications Manager cluster, and the headquarters cluster is connected to all other clusters via intercluster trunks. ABC wants to allow up to eight simultaneous calls across the IP WAN. To call between sites, an employee dials a 2-digit access code plus a 4-digit extension. If more than eight calls are made, or if the IP WAN is not available, calls should be sent to ABC Company's preferred long-distance carrier. If the trunk to the long-distance carrier is not available, the local provider should be used. The long-distance carrier requires 10 digits to complete a long-distance call. The local provider requires 11 digits to complete a long-distance call but only 7 digits for local calls.
What is the minimum number of route lists required at the headquarters location?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: C
Q128. - (Topic 2)
What is the purpose of using device pools?
A. to provide an easily modified set of system parameters for the Cisco Unified CallManager server and endpoints
B. to provide all the IP phone parameters required for auto-registration
C. to consolidate the dial plan for a set of IP phones in the same location
D. to provide a convenient way to define a set of common characteristics that can be assigned to devices
Answer: D
Explanation:
device pool definition -Device pools define sets of common characteristics for devices, the device pool structure supports the separation of user and location information. The device pool contains only device- and location-related information
Q129. - (Topic 12)
You want to deploy a mixture of unicast and multicast MOH streams. You need to configure
12 multicast streams, each supporting two codecs. How many unicast streams can be configured, assuming 250 is the maximum number of MOH streams supported on your MOH server?
A. 204
B. 214
C. 226
D. 250
E. 202
Answer: C
Explanation: Maximum Half Duplex Streams determine the number of devices that can be placed on unicast MOH. The parameter should be set to the value derived from the following formulA. (Server Capacity) - [(Number of Multicast MOH sources) x (Number of MOH codecs enabled)] 250 - [12 x 2] = 250 - 24 = 226
REF. Cisco Press CIPT1 Foundation Learning Guide, Second Edition, pg 374
Q130. - (Topic 12)
Which two items are needed to configure MeetMe Conference? (Choose two.)
A. description
B. partition
C. calling search space
D. minimum security level
E. directory number or pattern
F. device pool
G. region
Answer: D,E