★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 642-902 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/642-902-dumps.html


Testking.com is the most reliable supplier who gives you the precise, original as well as precise Cisco 642-902 practice questions which together with correct as well as verified answers. Our professional IT experts have rich expertise in writing the Cisco real tests. Thus, you can discover the valuable Cisco 642-902 simulation tests with high quality.

2021 Dec ccnp route 642-902 pass4sure:

Q151. Refer to the exhibit.

OSPF has been configured on all routers in the network and Area 1 has been configured as a NSSA. Which statement is true about the NSSA Area 1?

Select the best response.

A. Redistributed RIP and IGRP routes will appear in Area 1. They will be advertised via type 5 LSAs.

B. Only redistributed RIP routes will appear in Area 1. They will be advertised via type 7 LSAs.

C. Only redistributed IGRP routes will appear in Area 1. They will be advertised via type 7 LSAs.

D. No redistributed routes can appear in Area 1, only summary routes.

Answer: C


Q152. Refer to the following.

Router # sh ip route eigrp

13.0.0.0/8 is variably subnetted, 2 subnets, 2 masks

D 13.0.0.0/8 is a summary, 00:00:32, Null0

What happens to packets that are forwarded from the 13.0.0.0/8 network to the Null0 interface?

A. Flagged

B. Accepted

C. Summarized

D. Dropped

Answer: D


Q153. Refer to the exhibit.

Which statement is true about the configuration?

Select the best response.

A. RTA will not establish an OSPF adjacency with RTB.

B. RTA will not accept OSPF hello packets from RTB.

C. RTA will send OSPF hello packets, but will not send OSPF updates.

D. RTA will send OSPF updates, but will not establish an adjacency with RTB.

Answer: A


Q154. What is the sequence, from first to last, that OSPF will follow when choosing a router ID?

A. 1. the highest IP address on any active loopback interface; 

2. The router-id command results; 

3. The highest IP address of any active physical interface.

B. 1. the highest IP address on any active loopback interface; 

2. The highest IP address of any active Physical interface; 

3. The router-id command result.

C. 1. The highest IP address of any active Physical interface; 

2. the highest IP address on any active loopback interface; 

3. The router-id command results.

D. 1. The highest IP address of any active Physical interface;

2. The router-id command result; 

3. The highest IP address of any active physical interface.

E. 1. The router-id command results; 

2. The highest IP address of any active Physical interface; 

3.The highest IP address of any active physical interface.

F. 1. the router-id command result; 

2. the highest IP address on any active loopback interface; 

3. the highest IP address of any active physical interface

Answer: F


Q155. Which of the below mentioned conditions form a neighbor relation in EIGRP? (Choose Three)

A. Hello or ACK received

B. AS number match

C. Hello timer match

D. Identical metric(k vlaues)

E. Dead Timer Match

F. Network Time Match

Answer: ABD


Far out ccnp 642-902 books:

Q156. Refer to the exhibit.

Which three statements accurately describe the result of applying the exhibited route map? (Choose three.)

A. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.

B. The map prohibits the redistribution of all type 2 external OSPF routes.

C. The map permits the redistribution of all type 1 external OSPF routes.

D. The map prohibits the redistribution of all type 2 external OSPF routes with tag 6 set.

Answer: ACD


Q157. Which two methods advertise internal networks to external ISPs via BGP? (Choose two.)

A. using aggregate routes

B. disabling synchronization

C. forcing the next-hop address

D. defining routes via the network statement

Answer: AD


Q158. Observe the diagram. RTC is the hub router and RTA and RTB are the spokes. There are no virtual circuits between the spoke locations. What is needed to successfully route traffic to the 11.11.11.0/24 network from RTA?

A. The neighbor 10.10.10.1 next-hop-self command on RTA.

B. The neighbor 10.10.10.1 next-hop-self command on RTB.

C. The neighbor 10.10.10.1 next-hop-self command on RTC.

D. Nothing is required. This is the default behavior on this topology.

Answer: C


Q159. Router RTA is configured as follows:

RTA (config)#router rip

RTA(config-router)#network 10.0.0.0

RTA(config-router)#distribute-list 44 in interface BRIO

RTA(config-router)#exit

RTA(config)#access-list 44 deny 172.16.1.0 0.0.0.255

RTA(config)#access-list 44 permit any

What are the effects of this RIP configuration on router RTA? (Choose two)

A. no routing updates will be sent from router RTA on interface BRIO to router RTX

B. router RTA will not advertise the 10.0.0.0 network to router RTX

C. the route to network 172.16.1.0 will not be entered into the routing table on router RTA

D. user traffic from the 172.16.1.0 network is denied by access-list 44

E. the routing table on router RTA will be updated with the route to router RTW

Answer: CE


Q160. Refer to the exhibit.

Which command would verify if PBR reacts to packets sourced from 172.16.0.0/16?

Select the best response.

A. show ip route

B. show policy-map

C. show access-lists

D. show route-map

Answer: D