★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-410-dumps.html
It is impossible to pass Microsoft 70-410 exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Microsoft 70-410 practice questions. You will get a surprising result by our Improved Installing and Configuring Windows Server 2012 practice guides.
2021 Nov 70-410 installing and configuring windows server 2012 pdf download:
Q31. - (Topic 3)
Your company has an Active Directory domain. You log on to the domain controller. The Active Directory Schema snap-in is not available in the Microsoft Management Console (MMC).
You need to access the Active Directory Schema snap-in. What should you do?
A. Register Schmmgmt.dll.
B. Log off and log on again by using an account that is a member of the Schema Admins group.
C. Use the Ntdsutil.exe command to connect to the schema master operations master and open the schema for writing.
D. Add the Active Directory Lightweight Directory Services (AD/LDS) role to the domain controller by using Server Manager.
Answer: A
Explanation:
Install the Active Directory Schema Snap-In You can use this procedure to first register the dynamic-link library (DLL) that is required for the Active Directory Schema snap-in. You can then add the snap-in to Microsoft Management Console (MMC).
To install the Active Directory Schema snap-in:
1. To open an elevated command prompt, click Start, type command prompt and then right-click Command Prompt when it appears in the Start menu. Next, click Run as administrator
and then click OK.
To open an elevated command prompt in Windows Server 2012 R2, click Start, type cmd,
right-click cmd and then click Run as administrator.
2. Type the following command, and then press ENTER: regsvr32 schmmgmt.dll
3. Click Start, click Run, type mmc and then click OK.
4. On the File menu, click Add/Remove Snap-in.
5. Under Available snap-ins, click Active Directory Schema, click Add and then click OK.
6. To save this console, on the File menu, click Save.
7. In the Save As dialog box, do one of the following:
* To place the snap-in in the Administrative Tools folder, in File name, type a name for the snap-in, and then click Save.
* To save the snap-in to a location other than the Administrative Tools folder, in Save in , navigate to a location for the snap-in. In File name, type a name for the snap-in, and then click Save.
Q32. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named adatum.com.
You create an account for a temporary employee named User1.
You need to ensure that User1 can log on to the domain only between 08:00 and 18:00
from a client computer named Computer1.
From which tab should you perform the configuration?
To answer, select the appropriate tab in the answer area.
Answer:
Q33. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
Your company hires 500 temporary employees for the summer.
The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees.
You need to automate the creation of user accounts for the 500 temporary employees.
Which tool should you use?
A. ADSI Edit
B. The csvde.exe command
C. Active Directory Users and Computers
D. The Add-Member cmdlet
Answer: B
Explanation:
Csvde.exe is the best option to add multiple users. As you just need to export the excel
spreadsheet as a csv file and make sure the parameters are correct.
You can use Csvde to import and export Active Directory data that uses the comma-
separated value format.
Use a spreadsheet program such as Microsoft Excel to open this .csv file and view the
header and value information.
The CSVDE is a command-line utility that can create new AD DS objects by importing
information from a comma-separated value (.csv) file. This would be the least amount of
administrative effort in this case especially considering that these would be temporary
employees.
Q34. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network named LAN2.
You need to create a network adapter team from the three network adapters connected to LAN1.
Which tool should you use?
A. Routing and Remote Access
B. Network and Sharing Center
C. Server Manager
D. Network Load Balancing Manager
Answer: C
Q35. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?
A. From Windows Firewall with Advanced Security on Server2, create an inbound rule.
B. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.
C. From Server Manager on Server1, install a feature.
D. From Windows PowerShell on Server2, run Enable PSRemoting.
Answer: C
Explanation:
The Enable-PSRemoting cmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology. On Windows Server 2012 R2, Windows PowerShell remoting is enabled by default. You can use Enable-PSRemoting to enable Windows PowerShell remoting on other supported versions of Windows and to re-enable remoting on Windows Server 2012 if it becomes disabled. You need to run this command only once on each computer that will receive commands. You do not need to run it on computers that only send commands. Because the configuration activates listeners, it is prudent to run it only where it is needed. Note: (not B) You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems.
Updated transcender 70-410:
Q36. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an Application server named Server1. Server1 runs Windows Server 2012 R2.
Server1 is configured as an FTP server.
Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as
the control port and dynamically requests a data port.
On Server1, you create a firewall rule to allow connections on TCP port 21. You need to configure Server1 to support the client connections from App1.exe. What should you do?
A. Run netshadvfirewall set global statefulftp enable.
B. Create an inbound firewall rule to allow App1.exe.
C. Create a tunnel connection security rule.
D. Run Set-NetFirewallRule -DisplayName DynamicFTP -Profile Domain
Answer: A
Explanation:
The netsh firewall context is supplied only for backward compatibility. We recommend that you do not use this context on a computer that is running Windows Vista or a later version of Windows. In the netsh advfirewall firewall context, the add command only has one variation, the add rule command. Netsh advfirewall set global statefulftp: Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. When statefulftp is enabled, the firewall examines the PORT and PASV requests for these other port numbers and then allows the corresponding data connection to the port number that was requested. Syntax set global statefulftp { enable | disable | notconfigured } Parameters statefulftp can be set to one of the following values: enable The firewall tracks the port numbers specified in PORT command requests and in the responses to PASV requests, and then allows the incoming FTP data traffic entering on the requested port number. disable This is the default value. The firewall does not track outgoing PORT commands or PASV responses, and so incoming data connections on the PORT or PASV requested port is blocked as an unsolicited incoming connection. notconfigured Valid only when netsh is configuring a GPO by using the set store command.
Q37. - (Topic 3)
You run a Windows 2012 R2 Hyper-V Role Server, you need to shrink the size of files.vhd (200GB).
Using the Edit Virtual Disk Wizard what option should you choose?
A. Compact
B. Shrink
C. Resize
D. Convert
Answer: D
Explanation:
After converting a dynamically expanding VHD to the VHDX format, a new Shrink menu
option becomes available in the Hyper-V UI as shown.
VHDX format VHDs only expose the Shrink option when there is free space in the VHDX
file to reclaim.
Q38. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and is configured as the only domain controller.
You need to retrieve a list of all the user accounts. The list must include the last time each user was authenticated successfully.
Which Windows PowerShell command should you run?
To answer, drag the appropriate cmdlet or property to the correct locations to complete the PowerShell command in the answer area. Each cmdlet or property may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q39. - (Topic 3)
You have a server named Server1. Server1 runs a Server Core installation of Windows
Server 2012 R2. The local area connection on Server1 has the following configuration:
IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
Preferred DNS server: <none>
The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1.
Which command should you run?
A. sconfig.cmd
B. net.exe
C. Set-NetIPInterface
D. netsh.exe
Answer: A
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. Network settings You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.
Q40. - (Topic 1)
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.
You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses.
What should you do first?
A. Create a reverse lookup zone.
B. Convert the contoso.com zone to an Active Directory-integrated zone.
C. Configure dynamic updates for contoso.com.
D. Create a GlobalNames zone.
Answer: B
Explanation:
Although a GlobalNames zone is required in order to resolve single-label names, GNZs
must be AD-integrated.
Since this is a standard primary zone (as opposed to an ADDS primary zone), we must first
integrate the zone into Active Directory.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.3: Deploy and Configure the
DNS service, p.233
http://technet.microsoft.com/en-us/library/cc731744.aspx