★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-410-dumps.html
Doing 70-410 certification exams can be a challenge for people that are functioning full moment or studying for a graduate or publish graduate degree. There is a more simple and effective approach for the preparation associated with Microsoft 70-410 tests at Examcollection. By doing our own Microsoft 70-410 practice materials, you may be capable of getting a high score that maintains your passing your exam. Were proud of ourselves for the achievement associated with 100% passing ratio in 70-410 exam. We now have a conscientious team. The particular experts exert most their energies so that you can keep this particular Microsoft Microsoft study supplies up to date. Now we have your latest and comprehensive version of Microsoft 70-410 exam questions and practice tests on the site. You will be able to go via your Microsoft Microsoft exam paper smoothly in case you keep rate with the Microsoft 70-410 study guide. You may just devote a little funds and moment taking your Microsoft 70-410 online simulation exam or perhaps studying the 70-410 practice supplies. It is the utterly shortcut for you to Microsoft Microsoft certification.
2021 Nov exam ref 70-410 installing and configuring windows server 2012 pdf:
Q231. - (Topic 3)
You are attempting to delete a global security group in the Active Directory Users and Computers console, and the console will not let you complete the task.
Which of the following could possibly be causes for the failure? (Choose all answers that are correct.)
A. There are still members in the group.
B. One of the group’s members has the group set as its primary group.
C. You do not have the proper permissions for the container in which the group is located.
D. You cannot delete global groups from the Active Directory Users and Computers console.
Answer: B,C
Explanation:
A. Incorrect: It is possible to delete a group that has members.
B. Correct: If any member sets the group as its primary group, then the system does not permit the group to be deleted.
C. Correct: You must have the appropriate Active Directory permissions for the container in which the group is located to delete it.
D. Incorrect: It is possible to delete groups using the Active Directory Users and Groups console.
Q232. - (Topic 1)
Your network contains an Active Directory domain named contoso.com.
You log on to a domain controller by using an account named Admin1.Admin1 is a member of the Domain Admins group.
You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.)
Group1 is located in an organizational unit (OU) named OU1.
You need to ensure that users from Group1 can modify the Security settings of OU1 only.
What should you do from Active Directory Users and Computers?
A. Modify the Managed By settings on OU1.
B. Right-click contoso.com and select Delegate Control.
C. Right-click OU1 and select Delegate Control.
D. Modify the Security settings of Group1.
Answer: C
Explanation:
Delegating control to only the OU will allow the users of Group1 to modify the security settings.
Q233. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You need to ensure that when users log on to Server1, their user account is added automatically to a local group named Group1 during the log on process.
Which Group Policy settings should you modify?
A. User Rights Assignment
B. Preferences
C. Security Options
D. Restricted Groups
Answer: B
Explanation:
With Preferences, local and domain accounts can be added to a local group without affecting the existing members of the group
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 8: File Services and Storage, p. 361
http://technet.microsoft.com/en-us/library/cc785631(v=ws.10).aspx http://www.grouppolicy.biz/2010/01/how-to-use-group-policy-preferences-to-secure-local-administrator-groups/
http://technet.microsoft.com/en-us/library/cc780182(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831424.aspx
Q234. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add two printers. Modify the priorities of each printer and the security settings of each printer
B. Add two printers and configure printer pooling
C. Add one printer and configure printer pooling.
D. Add one printer. Modify the printer priority and the security settings
Answer: A
Explanation:
To set different print priority to different groups Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.
Q235. DRAG DROP - (Topic 1)
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.
You need to identify which network ID you should use for each subnet.
What should you identify?
To answer, drag the appropriate network ID to the each subnet in the answer area.
Answer:
Up to date mcsa 2012 practice test:
Q236. - (Topic 3)
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. the dism.exe command
B. the Add-WindowsFeature cmdlet
C. the imagex.exe command
D. the setup.exe command
E. the ocsetup.exe command
F. the Add-WindowsPackage cmdlet
G. the Install-Module cmdlet
H. the Install-RoleService cmdlet
Answer: A,B
Explanation:
Add-WindowsFeature -The Add-WindowsFeature cmdlet allows you to install specified roles, role services, and features on a computer that is running Windows Server 2008 R2. Install-WindowsFeature -Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features in Windows Server 2008 R2. dism /online /get-features PS C:\> Install-WindowsFeature -Name Web-Server – IncludeAllSubFeature -ComputerName Server1 –WhatIf
Q237. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2.
You need to create a new volume on File1.
The new volume must have the following configurations:
Have the drive letter T
Have the FAT32 file system
Be stored on a new virtual hard disk
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q238. - (Topic 3)
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?
A. DHCP guard
B. MAC address
C. Router guard
D. Port mirroring
Answer: B
Explanation:
When MAC addresses are not assigned to virtual machines, it could cause network problems.
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319 http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx
Q239. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a domain controller, named ENSUREPASS-DC01, which has Windows Server 2012 R2 installed. Another Contoso.com domain controller, named ENSUREPASS-DC02, has Windows Server 2008 R2 installed.
You have deployed a server, named ENSUREPASS-SR15, on Contoso.com’s perimeter network. ENSUREPASSSR15 is running a Server Core Installation of Windows Server 2012 R2.
You have been instructed to make sure that ENSUREPASS-SR15 is part of the Contoso.com domain.
Which of the following actions should you take?
A. You should consider making use of Set-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
B. You should consider making use of Get-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
C. You should consider making use of Test-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
D. You should consider making use of Add-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
Answer: D
Explanation:
Add-Computer – Add the local computer to a domain or workgroup.
Q240. - (Topic 2)
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.
You need to create an IPv6 reservation for Server2.
Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)
A. the hardware ID
B. the DHCPv6 unique identifier
C. the DHCPv6 identity association ID
D. the SMSBIOS GUID
E. the MAC address
Answer: B,C
Explanation:
The Add-DhcpServerv6Reservation cmdlet reserves a specified IPv6 address for the client identified by the specified Dynamic Host Configuration Protocol (DHCP) v6 unique identifier (ID) (DUID) and identity association ID (IAID).