★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 400-351 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/400-351-dumps.html


Q1. Why would you enable the RFC 3578 option when adding a new RADIUS authentication server to a WLC? 

A. you want to run both RADIUS and TACACS 

B. to support Disconnect and Change of Authorization 

C. to encrypt communications between the WLC and the RADIUS server 

D. to support RADIUS key wrapping 

Answer: B 

Explanation: 

If you are configuring a new RADIUS authentication server, choose Enabled from the Support for RFC 3576 drop-down list to enable RFC 3576, which is an extension to the RADIUS protocol that allows dynamic changes to a user session, or choose Disabled to disable this feature. The default value is Enabled. RFC 3576 includes support for disconnecting users and changing authorizations applicable to a user session and supports disconnect and change-of-authorization (CoA) messages. Disconnect messages cause a user session to be terminated immediately where CoA messages modify session authorization attributes such as data filters. 


Q2. Refer to the exhibit. 

You enabled NAT to make sure that your WLC is publicly reachable . if other NAT parameters are left to default1 which statement is true. ? 

A. The AP WLC discovery fails for APs int local mode using 209.165.200.44 

B. The AP WLC discover succeeds for OEAPsjoning the WLC using 192.168.3.44 

C. The AP WLC discover succeeds for OEAPsJoning the WLC using 192.168.3.44 or 209 165.200.44D. The AP WLC discover Fail for APs in local mode using 

192.168.3.44 

Answer: C 

Explanation: 

Section: 2.0 Network Infrastructure 


Q3. Your customer has high availability Clint SSO configure using a pair of Cisco 5508 WlCs running 8.0 code. The primary unit failed over and the secondary unit is now active. Which two statement are true. (Choose two) 

A. Both controller RMIcan be in different subnets. 

B. Only the clients that are in the run state are maintained during failover 

C. Clients that are in transition such as roaming are dissociated 

D. New mobility is supported 

Answer: B, C 


Q4. DRAG DROP 

Drag and drop the AVC configuration feature on the left to their respective function on the right.? 

Answer: 

Exhibit 


Q5. Which two option describe implication of deploying autonomous APs in repeater mode? (Choose two) 

A. The Ethernet port is disabled in repeater mode 

B. You can configure multiple VLANs on repeater access point 

C. You should disable Cisco Aironet extensions on the parent(root) AP and on the repeater APs 

D. The infrastructure SSID should be assigned to the native VLAN 

Answer: A, D 


Q6. 802.11k and 802.11k-enabled client devices send a request for a list of neighbor APs (a neighbor list) from the APs they are currently associated with. What is this 802.11management frame also known as? 

A. association response 

B. association packet 

C. beacon frame 

D. action packet 

Answer: D 


Q7. Your customer wants to configure LSCs and asks for specific information about which number to configure in the text box right next to the "Number of Attempts" 

.Which statement is true? 

A. The default number of attempts is 100. 

B. A value of 2 means that if an AP fails to join the Cisco WLC using an LSC, the AP attempts to Join the Cisco WLC using the default certificate 

C. A value of 255 means that if an AP fails to join the Cisco WLC using an LSC, the AP does not attempt to join the Cisco WLC using the default . 

D. A value of 3 means that if a user fails to authenticate, the user is disconnected after three retries. 

Answer: B 


Q8. Your customer needs the list of all the guest client that connected to Wi-Fi successfully but have not yet authenticated. The customer decides to create an advanced filter in Cisco Pounder monitor >client and user which two conditions should be included in the filter? (Choose two) 

A. PEM state =WebauthReqD 

B. On Network= Yes 

C. Status =Associated 

D. Type =Lightweight client 

Answer: C, D 


Q9. Your customer is thinking of migrating the exiting IEEE 802.11b/g network to an IEEE 802.11ac network which two statement are true ?(choose two) 

A. Backward compatibility need to be considered for the existing legacy IEEE 802.11b/g mobile devices. 

B. Channel option are limited on the radio band UNII 3 due to DFS 

C. Ensure that the WLANs have WMM enabled and support open or WPA2/AES encryption 1n order to reach IEEE 802.11ac speeds even on IEEE. 802.11ac clients 

D. Fewer APs have to be proposed because the IEEE 802.llac network provides a faster speed and larger converge area compared with the IEEE 802.11b/g network. 

Answer: A, C 


Q10. Which two Characteristic of U-APSD are true ?(Chosse two) 

A. U-APSD is enabled automatically when WMM is enabled 

B. In addition to extending battery life, U-APSD increases the latency of the traffic flow delivered over the wireless media 

C. U-APSD is configured on the access point switch port and supports the Power over Ethernet feature D. (Unscheduled automatic power save delivery) U-APSD is a Qos facility defined in IEEE 802.11e that extends the battery life of mobile clients 

Answer: A, D